Avaya 3100 Mobile Communicator and Security User Manual download pdf (Page 83)

Warning:

If you configure a new default locale, and then later remove the language pack, the Avaya

3100 Mobile Communicator Gateway uses the system-default locale (en_US).

Prerequisites

You must be logged into the Avaya 3100 Mobile Communicator Web Administration Console

as administrator. For more information, see Logging on to the Avaya 3100 Mobile

Communicator Web Administration Console as an administrator on page 16.

1. Click the System Configuration tab.

2. Select Gateway Actions, Configure Gateway.

3. In redundant configurations, select the gateway.

4. Click Edit.

5. In the Media Server Default Locale field, select the desired default local.

6. Click Save.

Removing a language pack

Use this procedure to remove a language pack from the Avaya 3100 Mobile Communicator

Gateway.

Warning:

To perform this procedure, you must stop and start the Avaya 3100 Mobile Communicator

Gateway. Schedule this procedure for an off-peak period to decrease user impact.

Important:

Do not attempt to remove the default en_US language pack.

Prerequisites

• You must be logged into the server as nortel. For more information, see

Accessing the

server command line as nortel on page 115.

• You must have the zip file for the language pack to be removed.

1. If not already installed on the server, copy the tested zip file, <zipfilename>.zip, to /

home/nortel.

2. Enter the following command

Removing a language pack

Administration and Security October 2010 83

1 ... 82 83 84 ... 116

No comments

Avaya 3100 Mobile Communicator and Security User Manual Page 83