Chapter 11 Dialing Translation and Restriction Permission Lists 105
CallPilot Manager Set Up and Operation Guide
Building a Dialing
Translation Table
To build a Dialing Translation Table, you must enter an Input value and an Output value for each
entry. The Input value is the number that the system looks up in the Dialing Translation Table. If
the corresponding entry matches, the system substitutes the Output value for the Input value. The
resulting number is ready to dial on the local network. Refer to “An example of a Dialing
Translation Table from a site in metropolitan Toronto” on page 102.
To build a Dialing Translation Table
1 Click the Configuration heading.
2 Click the Dialing Translation Table link.
The Dialing Translation Table page appears.
3 Click the Add button.
The Dialing Translation Setup page appears.
4 In the Input Value box type the input value.
5 In the Output Value box type the output value.
6 Click the Submit button.
Reviewing Dialing
Translation Table entries
You can review the entries in the Dialing Translation Table at any time.
To review Dialing Translation Table entries
1 Click the Configuration heading.
2 Click the Dialing Translation Table link.
The Dialing Translation Table page appears.
3 After you review the Dialing Translation Table entries, click the Main button.
Comments to this Manuals