Avaya BSGx4e CLI User's Guide download pdf (Page 115)

3 Configuration commands Security commands

NN47928-107 115

Security NAT public

A public IP address must be configured for static NAT and also for address

forwarding. This command adds public IP addresses to NAT. Up to 16

addresses can be configured. NAT addresses can be configured outside the

subnet of the WAN.

Syntax config security nat public <address> interface <type>

Parameters address Enter the public IP address. This can be a

single IP address or a range of address using

the xx.xx.xx.xx—xx.xx.xx.xx format.

interface type Select the interface type. The BSGX4e BG

supports eth0 and none. The default is none.

Select none if the public address you entered is

within the subnet range of the WAN. If you are

creating a public address outside of the existing

WAN subnet, select the WAN interface to which

it applies.

Example > config security nat public 192.168.134.199

commands

del security nat public

display security nat public

show security nat public

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 183 184

No comments

Avaya BSGx4e CLI User's Guide Page 115