Avaya BSGx4e CLI User's Guide download pdf (Page 74)

Media gateway controller protocol commands 3 Configuration commands

74 NN47928-107

mgcp server settings

The following command configures a MGCP server profile. Up to 3 servers

can be configured to implement a fail-over mode. If one is unreachable, the

other ones are tried.

Syntax config mgcp server setting <name> mgc1 [fqdn|<ip address>]

port1 <number> mgc2 [fqdn|<ip address>] port2 <number> mgc3

[fqdn|<ip address>] port3 <number> retries <number> blacklist

Parameters setting name Enter the name of the server profile.

mgc1 fqdn|ip address

Enter a fully qualified domain name or IP

address of the first media gateway controller.

port1 number Enter the port number for mgc1. The default is

2727.

mgc2 fqdn|ip address

Enter a fully qualified domain name or IP

address of the second media gateway

controller.

port2 number Enter the port number for mgc2. The default is

2727.

mgc3 fqdn|ip address

Enter a fully qualified domain name or IP

address of the third media gateway controller.

port3 number Enter the port number for mgc3. The default is

2727.

retries number Enter the number of retries before a MGCP call

agent is blacklisted. The default is 5 retries.

(Specifying 0 disables call server failover.)

blacklist seconds Enter a blacklist timer. The default is 600

seconds (10 minutes).

Example > config mgcp server settings Sylantro mgc1 206.229.26.51

port1 2727

commands

del mgcp server settings

display mgcp server settings

show mgcp server settings

stats mgcp server settings

show mgcp server status

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 183 184

No comments

Avaya BSGx4e CLI User's Guide Page 74