Logging commands 3 Configuration commands
66 NN47928-107
logging dest
If the destination map for a message type is external, a server must be
configured. The server destinations are:
z UDP: Messages are sent in raw UDP format to a UDP server.
z syslog: Messages are sent in Syslog format to a Syslog server.
Use this command to configure logging destinations.
Syntax config logging dest udpip <ip address> udpport <port> sysip
<ip address> sysport <port> facility
[local0|local1|local2|local3|local4|local5 |local6|local7]
Parameters udpip ip address Enter the IP address of a standard UDP
receiver.
udpport port Enter the port of the receiving UDP logger.
sysip ip address Enter the IP address of a receiving syslog
daemon.
sysport port Enter the port of a receiving syslog daemon.
facility local1-7 Enter the syslog facility to use in the form of
localn, where n is 0-7.
Example > config logging dest udpip 192.168.22.60 udpport 1234
Related
commands
display logging dest
show logging dest
show logging map
Comments to this Manuals