Service commands 3 Configuration commands
120 NN47928-107
service telnet
Telnet allows access to the BSGX4e over a remote terminal session. Telnet
access requires the following:
z The workstation on the WAN or LAN must provide a Telnet client, for
example Tera Term Pro, Windows telnet client, and Linux telnet client.
z The Telnet server in the unit must be enabled and the firewall must
allow Telnet access.
Syntax config service telnet enabled [yes|no] port <number>
Parameters enabled yes|no Enable/disable the Telnet server. The default is
enabled.
port number Enter a Telnet server port number. The default
is 23.
Example The following example disables the Telnet server:
> config service telnet enabled no
Related
commands
display service telnet
show service telnet
whoison
Comments to this Manuals