Avaya BSGx4e CLI User's Guide download pdf (Page 80)

Netflow commands 3 Configuration commands

80 NN47928-107

netflow filter

Use this command to configure the Netflow filter. By default, all traffic is

monitored with a default setting of any for all fields.

Syntax config netflow filter sourceport <port> destport <port> scrip

<ip address> dstip <ip address> tos <value> ipproto

[any|udp|tcp|icmp|esp|gre] ethproto [ip|arp|rarp] srcmac <mac

address> dstmac <mac address> interface <if>

Parameters sourceport port Enter the source port to monitor.

destport port Enter the destination port to monitor.

srcip ip address Enter the source IP address to monitor.

dstip ip address Enter the destination IP address to monitor.

tos value Enter the ToS tag value to monitor.

ipproto any|udp|tcp|icmp|esp|gre

Enter the IP protocol to monitor.

ethproto ip|arp|rarp|any

Enter the Ethernet protocol to monitor.

srcmac mac address Enter the source MAC address to monitor.

dstmac mac address Enter the destination MAC address to monitor.

interface if Enter the interface to monitor.

Example > config netflow filter srcip 10.0.1.100 tos 248

commands

display netflow filter

show netflow filter

show netflow agent

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 183 184

No comments

Avaya BSGx4e CLI User's Guide Page 80