Avaya BSGx4e CLI User's Guide download pdf (Page 137)

3 Configuration commands SNMP commands

NN47928-107 137

snmp traps

Use this command to configure SNMP traps. The following traps are

supported:

z ColdStart: indicates the BSGX4e has restarted.

z WarmStart: indicates the SNMP agent has restarted.

z LinkUp: indicates an interface has come up.

z LinkDown: indicates an interface has gone down.

z AuthenticationFail: indicates SNMP authentication has failed (such

as when the wrong community name is used).

Syntax config snmp traps enabled [yes|no] comm <community> ip <ip

address>

Parameters enabled yes|no Enable or disable the SNMP traps.

comm community Enter the traps community

ip ip address Enter the IP address of the management station

receiving the traps.

Example > config snmp traps enabled yes comm public ip 192.168.134.161

commands

display snmp traps

show snmp traps

clear snmp agent

stats snmp agent

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 183 184

No comments

Avaya BSGx4e CLI User's Guide Page 137