Avaya BSGx4e CLI User's Guide download pdf (Page 130)

SIP commands 3 Configuration commands

130 NN47928-107

sip ua port

The SIP user agent (UA) allows an analog device to use VoIP connections to

place and receive calls on a BSGX4e. The analog device must be connected

to the BSGX4e port as described in the installation guide. The device can be

a single analog device such as a telephone or fax machine or a gateway

device which connects to multiple analog devices.

Use this command to configure the SIP user agent port. For more

information on SIP user agent settings including session expiration timers

and hold timers, see SIP UA settings on page 132

Syntax config sip ua port <number> name <name> userid <id> authid

<id> password <password> codec1

NOTUSED] codec3

NOTUSED] rfc2833 [yes|no] payload <type> mls

[yes|no] up [yes|no]

Parameters port number Enter 1 for the port.

name name Enter the name for the display.

userid id Enter the User ID of the SIP account.

authid id Enter the authentication ID of the SIP account.

password password Enter the password of the SIP account.

G729A_20|NOTUSED

Enter the most preferred codec and packet

time. The default is PCMU_20.

G729A_20|NOTUSED

Enter the second most preferred codec and

packet time. The default is PCMA_20.

G729A_20|NOTUSED

Enter the third most preferred codec and

packet time. The default is G729A_20.

G729A_20|NOTUSED

Enter the fourth most preferred codec and

packet time. The default is NOTUSED.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 183 184

No comments

Avaya BSGx4e CLI User's Guide Page 130