Avaya B5800 User Manual download pdf (Page 100)

10. Click Commit.

Creating a software library

Procedure

1. From the System Manager console, under Elements, select Inventory.

2. On the Inventory page, click Upgrade Management > Software Library.

3. Click New.

4. On the Add Software Library page, in the Library Server Details tab, do the

following:

a. In the Name field, enter the appropriate name.

b. In the IP Address field, enter the IP address of the library server.

c. In the Description field, enter a description of this library server as

appropriate.

d. In the Server Path field, enter the full path of the software library location

e. To use this software library as the default, click the Default Library check

box.

f. If this software library is remote, click the Remote Library check box.

g. In the Default Protocol drop-down box, select the appropriate protocol.

h. Click the HTTP/HTTS check box.

i. In the HTTP/HTTS URL field, enter the appropriate URL to the firmware files in

Software Library.

j. Depending on the default protocol you selected in step g, click on the

corresponding tab (FTP Configuration, SCP Configuration, or SFTP

Configuration) and configure the authentication parameters as required.

Note:

Configuring the authentication parameters for the default protocol is

mandatory.

k. Click Commit.

Upgrading an R6.2 system with an R6.2 service pack

100 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 323 324

No comments

Avaya B5800 User Manual Page 100