Avaya B5800 User Manual Page 223

  • Download
  • Add to my manuals
  • Print
  • Page
    / 324
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 222
Example of BRI So8 module configuration
The ports on a BRI So8 module can be used for the connection of ISDN devices. Following
are examples of how to configure a port on the BRI So8 module for an ISDN terminal and for
video conferencing.
Example 1: ISDN terminal
About this task
In this example, calls on DID 123456 are routed to the first port of the So8 expansion module.
That port has been configured as Line Group ID 701.
Procedure
1. Configure an incoming call routing. The destination is a short code that directs the
call to the line group ID that contains the SO lines.
The Bearer Capability has been set to Any to allow data and voice via this route.
• Line Group ID: 0
• Incoming Number: 123456
• Destination: 123456
• Bearer Capability: Any
2. Create a system short code. This is the destination used in the incoming call
route.
• Short Code: 123456
• Telephone Number: 123456
• Line Group ID: 701
• Feature: Dial
3. Send the configuration to the control unit.
Any call coming into the main system on DID 123456 will now be passed directly to
the first port.
4. If you wish to assign DIDs from your main pool to individual ports and avoid network
charges when dialing between them, try variations on the following:
a. You have DID ranges, for example: 7325551000 to 7325551099. You wish to
assign 7325551000-19 to port 1 and 7325551020-20 to port 2 etc.
Example of BRI So8 module configuration
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 223
Page view 222
1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 323 324

Comments to this Manuals

No comments