BCM50 System Start Up
NN40010-318 Issue 1.2 BCM50 Rls 6.0 45
This number allows the system to determine how many digits to read on an incoming call
to determine that the call is meant for this system.
Indicate the maximum number of times that a call will be transferred within the SL-1
network before the call is dropped. Protocol must be set to SL-1 to display this field.
Specify a carrier failure standard (T1A-5474, TR62411)
Define a loss plan setting.
Select the framing format used by your T1 or PRI service provider: Extended Superframe
(ESF) or Superframe (SF). Contact your T1 or PRI service provider for the proper setting.
(SF or Superframe is sometimes known as D4.)
Define the encoding signals on a T1 line. Select the standard used by your T1 service
provider. Contact your T1 service provider for the proper setting.
Turn the internal T1 channel service unit (CSU) on or off.
Set the gain level of the transmitted signal. This setting appears only when the Internal
CSU is Enabled.
000-100, 100-
200, 200-300,
300-400, 400-
500, 500-600, or
600-700 feet
Set the distance between BCM and an external channel service unit. This setting only
appears when the Internal CSU is Disabled. Contact your service provider for the proper
settings.
Ensure this is enabled or disabled to match the service provider Cyclic Redundancy
Check (CRC4) setting for the trunk.
Comments to this Manuals