16 Overview
•
provision the Device Settings parameters on the IP Phone 1140E with
SIP Firmware
Note: Conver ting the firmware on an IP Phone 1140E from UNIStim
Firmware to SIP Firmware overwrites the UNIStim Firmware. The IP Phone
1140E cannot operate in both modes simultaneously. A switch from UNIStim
to SIP Firmware or SIP to UNIStim Firmware requires a firmware reload.
The following figure shows the main components of the IP Phone 1140E
with SIP Firmware.
Figure 1
IP Phone 1140E with SIP Firmware
Related documentation
The SIP Firmware Release 1.1 for IP Phone 1140E User Guide
(NN43113-101) tells the end user how to use the IP Phone 1140E, including
how to:
•
use the Context-sensitive soft keys and Navigation key cluster
•
enter text
•
use the address book
•
access and use the call inbox and call outbox
•
configure and use instant messaging
•
receive, identify, answer, redirect, decline, or ignore an incoming call
•
operate hold, three-way calling, call transfer, and call park
•
use other features such as speed dial, call forward, do not disturb, and
setting up conference calls
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Comments to this Manuals