Avaya 1140E User Manual Page 85
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Introduction 85
be on the Data VLAN. If the DHCP server is not
on the Data VLAN, the IP Phone 1140E fails
to receive the DHCP information and fails to
register. In addition, another DHCP server must
reside in the Voice VLAN to provide the network
parameters required. For more information, see
the section on DHCP Auto VLAN Discovery.
4095
All telephony traffic that is transmitted on the
telephony port has an 802.1q header appended
and its Voice VLAN ID is set to the value
manually configured here. Place the cursor over
the 4095 and press the enter NAV key to modify
this value to the desired Voice VLAN tag. Note
that the value 4095 is not a valid VLAN ID. This
is intentional to ensure a proper VLAN ID is
entered.
VLAN Filter
Configure the VLAN Filter (not available if Voice VLAN is set to No).
Table 17
VLAN Filter
VLAN Filter Setting
Result
Enabled (box is checked) Traffic is forwarded to the IP Phone 1140E port,
based on a review of the MAC address of the
packet as well as the 802.1q tag value. Traffic
is forwarded through the IP Phone 1140E port,
(to the network stack of the telephone), only if
the packet matches the MAC address of the IP
Phone 1140E and contains the Voice VLAN tag.
If the Automatic VLAN Discovery feature is used,
the filter is adjusted dynamically as the IP Phone
1140E validates the VLAN suggested by DHCP.
Disabled The VLAN filter is disabled by default. If the
VLAN filter is disabled, traffic is forwarded to the
IP Phone 1140E port based only on a review of
the MAC address of the packet. The IP Phone
1140E accepts traffic addressed to the MAC
address of the IP Phone 1140E as well as any
broadcast or multicast packets from any VLAN.
Disable PC Port
With a disabled PC Port, the IP Phone 1140E with SIP Firmware does not
receive or send packets to or from the PC port. No device can use the
PC port to connect to the network.
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
- Phone 1140E Administration 1
- Contents 3
- Index 127 5
- 6 Contents 6
- New in this release 7
- 8 New in this release 8
- How to Get Help 9
- 10 How to Get Help 10
- Introduction to this guide 11
- Related publications 13
- 14 Introduction to this guide 14
- Overview 15
- Related documentation 16
- Installation overview 17
- 18 Overview 18
- Figure 2 18
- Introduction 19 19
- Figure 3 19
- Supported SIP proxy servers 20
- Before installation 21
- Preinstallation 23 23
- 24 Before installation 24
- How provisioning works 25
- Procedure 3 26
- Figure 4 27
- Sample provisioning file 27
- IP Phone 1140E 30
- Device configuration commands 34
- ATTENTION 36
- Feature configuration commands 36
- QoS and ToS commands 44
- Tone configuration commands 45
- NAT configuration commands 47
- VQMon configuration commands 48
- System commands 50
- Dialing function description 52
- Dialing plan 52
- Figure 7 53
- Figure 8 53
- Figure 9 54
- Figure 10 55
- DRegex rules 55
- Downloadable WAV files 56
- Configure the DHCP server 57
- Full DHCP mode 58
- SIP IP Phone class identifier 59
- DHCP VLAN Auto Discovery 61
- 62 Configure the DHCP server 62
- Procedure 4 63
- Installing the IP Phone 1140E 63
- Figure 11 65
- IP Phone 1140E connections 65
- 1140E firmware 67
- Procedure 6 68
- Procedure 7 69
- 3. [FW] Finished 77
- Voice Quality Monitoring 79
- Server set-up 80
- How VQMon works 80
- Introduction 81
- Authorization 83
- Device ID 83
- Password 83
- NO DHCP mode 83
- Net Mask 84
- Voice VLAN 84
- VLAN Filter 85
- Disable PC Port 85
- Data VLAN 86
- PC-Port Untag all 86
- Ignore GARP 87
- Provisioning 87
- NAT Traversal 88
- PVQMon IP 88
- Configure the device settings 89
- STUN S2 IP: 96
- (Single Call Arrangement) 97
- Privacy access codes 98
- Location information 99
- Dialing plan configuration 100
- Characteristics of E911 calls 100
- IP Phone 1140E restrictions 101
- NN43113-300 02.05 Standard 102
- 27 May 2008 102
- NAT firewall traversal 103
- 104 NAT firewall traversal 104
- Three-port switch and VLAN 105
- Phone 1140E 109
- SIP responses 110
- Default error handling 115
- SIP header fields 115
- SDP and Call Hold 119
- Transport layer protocols 119
- SIP security authentication 119
- SIP DTMF Digit transport 120
- Supported subscriptions 120
- Supported instant messaging 120
- Nortel unencrypted Yes 121
- Nortel encrypted Yes 121
- Procedure 14 123
- Reloading UNIStim Firmware 123
- IP Phone 1140E diagnostics 124
- Symbols/Numerics 127
- 128 Index 128
- Index 129 129
- 130 Index 130
Related products and manuals for IP phones Avaya 1140E
IP phones Avaya 1110 User's Guide
(30 pages)
(30 pages)
IP phones Avaya BCM Call Center User Manual
(138 pages)
(138 pages)
IP phones Avaya 0604D9F User Manual
(8 pages)
(8 pages)
IP phones Avaya R4.3 User Manual
(376 pages)
(376 pages)
IP phones Avaya LAN CTE Configuration Guide
(30 pages)
(30 pages)
IP phones Avaya VPNremote Phone User Manual
(25 pages)
(25 pages)
IP phones Avaya 1165E User's Guide
(376 pages)
(376 pages)
IP phones Avaya IP Phone 2001 User's Guide
(14 pages)
(14 pages)
© 2020, manymanuals.com. All rights reserved. | 0.176 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals