Avaya 1140E User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
New in this release
Other changes
For a detailed history of past releases of this document, see "Revision
history" (page 7).
Revision history
May 2008
Standard 02.05. This document is up-issued to reflect changes in technical
content.
February 2008
Standard 02.04. This document is up-issued to include editing changes.
November 2007
Standard 02.03. This document is up-issued to reflect changes in the
technical information in response to change requests. A note was added
stating that NAT_SIGNALLING is required for networks that use STUN
or SIP_PING for NAT traversal. The commands FORCE_OCT_END
and OCT_END were changed to FORCE_OCT_ENDDIAL and
DISABLE_OCT_ENDDIAL respectively.
October 2007
Standard 02.02. This document is up-issued to ensure that the value of
802.1P_MEDIA parameter in the QoS and ToS commands must be set to
-1 to be able to have a voice path.
July 2007
Standard 02.01. This document is up-issued to support SIP Fir mware for IP
Phone 1140E Maintenance Release 1.1.
March 2007
Standard 01.02. This document is up-issued to incorporate an addition to
the Maintenance and Troubleshooting section.
January 2007
Standard 01.01. This is a new document created to support the IP Phone
1140E with SIP Firmware.
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 131 132

Comments to this Manuals

No comments