Avaya 1140E User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
57
Configure the DHCP server
Use DHCP to provide partial Device Settings or full Device Settings, as well
as to automatically provide Voice VLAN IDs.
Table 7
Characteristics of Partial DHCP mode and Full DHCP mode
Partial DHCP mode Partial DHCP mode retrieves the following network
parameters from the DHCP server: IP address, subnet
mask, and default gateway configuration for the IP
Phone 1140E.
Full DHCP mode As well as those parameters retrieved in Partial DHCP
mode, Full DHCP also retrieves the following from the
DHCP server: DNS server and Provisioning Server.
Auto VLAN Discovery Auto VLAN Discovery retrieves the Voice VLAN ID for
the IP Phone 1140E with SIP Firmware.
Partial DHCP mode
After the IP Phone 1140E with SIP Firmware is configured to operate
in Partial DHCP mode, the DHCP server does not need any special
configuration to support an IP Phone 1140E with SIP Firmware. The IP
Phone 1140E with SIP Firmware receives the following Device Settings
parameters from the DHCP server in the following table:
Table 8
DHCP options in Partial DHCP mode
Parameter requested by the
IP Phone 1140E
Description
DHCP server option
Subnet mask The subnet mask of the IP
Phone 1140E.
1
Router and gateways IP address of the default
gateway of the IP Phone
1140E.
3
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 131 132

Comments to this Manuals

No comments