Configuring X.25 Services
4-28 117377-A Rev. A
X.25 Network Service Record Parameter Descriptions
This section provides information on how to set all network service record
parameters in the X.25 Service Configuration window (F
igure 4-4).
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the network service record.
Instructions: Set this parameter to Disable only if you want to disable this service
record.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.4.2.1.2
Parameter: Type
Default: None
Options: PDN
| DDN | PTOP | IPEX | QLLC
Function: Specifies the type of X.25 service that this interface supplies.
• PDN for Public Data Network service
• DDN for Defense Data Network service
• PtoP for Point-to-Point network service
• IPEX for TCP/IP Tunneling over X.25
• QLLC for Qualified Logical Link Control service
Instructions: Choose one of these network service types. If you specify IPEX or QLLC
you must configure several IPEX or QLLC specific parameters (refer to
Cha
pter 6 for IPEX and Chapter 7 for QLLC).
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.4.2.1.9
Comments to this Manuals