Configuring X.25 Services
3-16 117377-A Rev. A
Parameter: Service VC Type
Default: SVC
Options: SVC | PVC
Function: Specifies whether this service record applies to an SVC or a PVC.
Instructions: Select the VC type that describes this circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.4.2.1.36
Parameter: First PVC LCN
Default: 1
Options: 0 to 4095
Function: Identifies the lowest PVC logical channel number for the interface. Note
that each PVC requires its own service record.
Instructions: Enter the lowest PVC logical channel number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.4.2.1.37
Parameter: Number of PVC LCN
Default: 1
Options: 1 to 512
Function: Specifies the total number of PVC logical channel numbers for the
interface. You must enter a value in this parameter if you want to use the
Copy function to replicate your X.25 Gateway configurations (see
Configuring X.25 Gateway Services).
Instructions: Enter the number of PVC LCNs on this interface.
Note: You can enable bridging only with SVC Service VC Type. Bridging
does not work with PVCs.
Comments to this Manuals