Editing IPEX Parameters
117377-A Rev. A 6-9
Parameter: Source Connection Type
Default: None
Options: PVC
| SVC | TCP
Function: Specifies the type of connection at the sending end of the original
message. PVC and SVC specify an X.25 Level 3 connection, either a
permanent virtual circuit or a switched virtual circuit. TCP is a
Transmission Control Protocol connection.
Source connection types PVC and SVC send to destination connection
type TCP. Source connection type TCP sends to destination connection
type PVC or SVC.
Instructions: Select PVC to specify an X.25 connection to a permanent virtual circuit.
Select SVC to specify an X.25 connection to a switched virtual circuit.
Select TCP to specify a Transmission Control Protocol connection.
MIB Object ID: 1.3.6.1.4.18.3.5.15.2.1.4
Figure 6-7. Source Connection Type Menu
8.
After you select PVC, SVC or TCP, click on OK.
Note: Either the source or the destination connection type (but not both)
must be TCP.
Comments to this Manuals