Sample IPEX Configurations
117377-A Rev. A A-7
You have completed the IPEX configuration.
Note: This example allows calls from the X.25 DTE to the X.25 host. After
the initial call, traffic can flow in both directions. To allow either side of the
connection to make call requests, you must make the same configuration
again, but in the opposite direction. That is, create an SVC mapping type on
the X.25 host, and a TCP mapping type on the X.25 DTE. For the second
configuration, use a different TCP port. Both mapping types can exist on the
same interface.
Comments to this Manuals