Avaya X.25 User Manual Page 160
- Page / 198
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuring X.25 Services
A-6 117377-A Rev. A
14. Click on the Mapping Type parameter bar, click on Values, and choose
End_to_End as the mapping type unless you must perform X.121 address
translation. Address translation is only possible in Local Mode.
15. Click on OK.
The IPEX Mapping Parameters window for PVC or SVC appears.
16. Enter a Source PVC LCN or an X.121 called address, as appropriate.
In this example, the address is 12345678.
17. Enter the Remote IP Address.
In this example, the address is 192.32.50.1.
18. Enter the Remote TCP Port Number.
This is the destination TCP port number that receives the IPEX packets. For
this example, enter 13000 for COM1.
19. Click on OK. Click on Done.
You have completed the IPEX configuration for COM1.
Configuring the TCP Connection
To configure the TCP connection:
1. Repeat steps 1 to 13 in the previous section,“Configuring the PVC or
SVC Connection,” but select a different COM port.
2. Click on the Values button and select TCP as the Source Connection
Type.
3. Click on OK.
The IPEX Mapping Parameters window for TCP appears.
4. Enter the Local TCP port number.
In this example, the number is 13000.
5. Enter either PVC or SVC as the Destination Connection Type.
6. Click on OK. Click on Done.
- Configuring X.25 1
- Services 1
- Contents 5
- 117377-A Rev. A 11
- About This Guide 15
- Before You Begin 16
- Conventions 16
- Acronyms 17
- Bay Networks Customer Service 19
- How to Get Help 20
- Chapter 1 21
- X.25 Overview 21
- X.25 and the OSI Model 22
- Physical Layer 23
- Data Link Layer 23
- Figure 1-3. LAPB Frame 24
- X.25 Service Types 25
- 1-6 117377-A Rev. A 26
- PVCs and SVCs 27
- How X.25 Services Work 27
- SVC Services 28
- 117377-A Rev. A 1-9 29
- How IPEX Works 33
- IPEX Network Interfaces 34
- X.25 PLP Interface 35
- TCP Interface 35
- IPEX Facility Support 36
- IPEX Connection Summary 38
- IPEX Mapping 38
- Q-bit Support 40
- How QLLC Works 41
- QLLC Mapping 42
- Adjacent and Partner Devices 42
- Chapter 2 45
- Implementation Notes 45
- Load Sharing 46
- Max Packet Length 47
- Flow-Control Negotiation 47
- Configuring Line Services 48
- DDN Default Service Record 49
- RFC 1356 Multiplexing 50
- 117377-A Rev. A 2-7 51
- PtoP Encapsulation 52
- X.25 over ISDN D Channel 52
- Further Information 53
- Chapter 3 55
- Enabling X.25 Service 55
- Selecting a Connector 56
- Config window (F 57
- Configuration window (F 58
- 60
- 3-8 117377-A Rev. A 62
- 3-10 117377-A Rev. A 64
- 3-12 117377-A Rev. A 66
- 67
- 3-14 117377-A Rev. A 68
- 3-16 117377-A Rev. A 70
- Chapter 4 73
- 4-2 117377-A Rev. A 74
- 80
- 4-10 117377-A Rev. A 82
- 4-12 117377-A Rev. A 84
- 4-14 117377-A Rev. A 86
- 88
- 4-18 117377-A Rev. A 90
- 92
- 93
- 4-22 117377-A Rev. A 94
- 95
- 96
- Click on Done 99
- 100
- 100
- Editing X.25 Parameters 101
- Configuring X.25 Services 102
- 4-30 117377-A Rev. A 102
- 4-32 117377-A Rev. A 104
- 106
- 108
- 110
- 110
- Deleting X.25 from the Router 111
- Chapter 5 113
- Editing LAPB Parameters 113
- 115
- 115
- 5-4 117377-A Rev. A 116
- 118
- Chapter 6 121
- Editing IPEX Parameters 121
- IPEX > Global 122
- 6-6 117377-A Rev. A 126
- 117377-A Rev. A 6-7 127
- 6-8 117377-A Rev. A 128
- 129
- 6-10 117377-A Rev. A 130
- Figure 6-8. Mapping Type Menu 130
- 131
- 6-12 117377-A Rev. A 132
- 6-14 117377-A Rev. A 134
- 6-16 117377-A Rev. A 136
- 6-18 117377-A Rev. A 138
- 6-20 117377-A Rev. A 140
- 117377-A Rev. A 6-21 141
- Deleting IPEX from the Router 142
- Chapter 7 143
- Editing QLLC Parameters 143
- 7-2 117377-A Rev. A 144
- 117377-A Rev. A 7-3 145
- Click on Add 146
- QLLC Mapping Parameters 148
- 7-10 117377-A Rev. A 152
- Appendix A 155
- Sample IPEX Configurations 155
- A-2 117377-A Rev. A 156
- Sample IPEX Configurations 157
- IPEX Single-Node Switching 158
- 117377-A Rev. A A-5 159
- Appendix B 163
- QLLC Configuration Examples 163
- Upstream QLLC Network 164
- QLLC Configuration Examples 165
- Downstream QLLC Network 166
- Endpoint QLLC Network 168
- Backbone QLLC Network 170
- Appendix C 171
- C-2 117377-A Rev. A 172
- (continued) 173
- C-4 117377-A Rev. A 174
- C-6 117377-A Rev. A 176
- Table C-6. IPEX Parameters 176
- Table C-7. QLLC Parameters 177
- Appendix D 179
- The Mapping Table follows: 180
- (continued) 181
- D-4 117377-A Rev. A 182
- D-6 117377-A Rev. A 184
- D-8 117377-A Rev. A 186
- D-10 117377-A Rev. A 188
- 117377-A Rev. A Index-1 191
- 117377-A Rev. A Index-3 193
- 117377-A Rev. A Index-5 195
- 117377-A Rev. A Index-7 197
Related products and manuals for Networking Avaya X.25
Networking Avaya BCM450 Configuration Guide
(11 pages)
(11 pages)
Networking Avaya X.25 User Manual
(50 pages)
(50 pages)
(30 pages)
Networking Avaya v5.0.450.2 Application Note
(44 pages)
(44 pages)
Networking Avaya BayRS Version 14.00 Notice
(64 pages)
(64 pages)
Networking Avaya (109351-F User Manual
(136 pages)
(136 pages)
Networking Avaya B179 Application Note
(35 pages)
(35 pages)
Networking Avaya BCM200/400 Installation Manual
(445 pages)
(445 pages)
© 2020, manymanuals.com. All rights reserved. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals