Avaya 1140E User Manual Page 30
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
30 Configure the provisioning server
CAUTION
The version number stored in the FLASH is permanent
until a higher number is downloaded from the Provisioning
file or you selectSrvcs, System, Erase User Data on the
IP Phone 1140E.
— FORCED - This mode forces the firmware download process.
FORCED can be used for firmware downgrade procedures.
Note: In FORCED or AUTO DOWNLOAD_MODE, the version
number is overwritten with each firmware download.
•
FILENAME [filename] specifies the file name to be downloaded for
this section. For the language and tone section, the use of multiple
filenames is allowed.
Optional keywords in the Provisioning file are:
•
PROMPT [YES | NO] is used to indicate if the IP Phone 1140E should
prompt the user for an update before the operation is performed. This
command is optional with the default set to NO.
— YES - enables the prompt
— NO - disables the prompt
•
PROTOCOL [TFTP | FTP | HTTP] defines the protocol used to download
the file. The IP Phone 1140E with SIP Firmware supports TFTP, FTP
and HTTP protocols for file download. This command is optional. If it is
not present, the default protocol TFTP is used.
If using FTP or HTTP, SRV_USER_NAME and SRV_USER_PASS are
also key words. These commands specify the credential used to login
to the file server for file download. If not present, the protocol default
credential is used (no credential for TFTP and HTTP and anonymous
with no password for FTP).
•
SERVER_IP [address] allows the IP Phone 1140E to connect to the
specified IP address or name of the server for which the file can be
downloaded. If the address is not specified, the SERVER_IP that is used
is the same SERVER_IP that is used to download the provisioning file.
• DELETE_FILES [YES | NO], if present, erases the language and tone
files stored in the IP Phone 1140E before new files are downloaded.
Otherwise, new files with different names are added without erasing
existing files. This command is optional. Note that there is a hard limit
of 5 language files and 5 tone files that can be stored in the IP Phone
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
- Phone 1140E Administration 1
- Contents 3
- Index 127 5
- 6 Contents 6
- New in this release 7
- 8 New in this release 8
- How to Get Help 9
- 10 How to Get Help 10
- Introduction to this guide 11
- Related publications 13
- 14 Introduction to this guide 14
- Overview 15
- Related documentation 16
- Installation overview 17
- 18 Overview 18
- Figure 2 18
- Introduction 19 19
- Figure 3 19
- Supported SIP proxy servers 20
- Before installation 21
- Preinstallation 23 23
- 24 Before installation 24
- How provisioning works 25
- Procedure 3 26
- Figure 4 27
- Sample provisioning file 27
- IP Phone 1140E 30
- Device configuration commands 34
- ATTENTION 36
- Feature configuration commands 36
- QoS and ToS commands 44
- Tone configuration commands 45
- NAT configuration commands 47
- VQMon configuration commands 48
- System commands 50
- Dialing function description 52
- Dialing plan 52
- Figure 7 53
- Figure 8 53
- Figure 9 54
- Figure 10 55
- DRegex rules 55
- Downloadable WAV files 56
- Configure the DHCP server 57
- Full DHCP mode 58
- SIP IP Phone class identifier 59
- DHCP VLAN Auto Discovery 61
- 62 Configure the DHCP server 62
- Procedure 4 63
- Installing the IP Phone 1140E 63
- Figure 11 65
- IP Phone 1140E connections 65
- 1140E firmware 67
- Procedure 6 68
- Procedure 7 69
- 3. [FW] Finished 77
- Voice Quality Monitoring 79
- Server set-up 80
- How VQMon works 80
- Introduction 81
- Authorization 83
- Device ID 83
- Password 83
- NO DHCP mode 83
- Net Mask 84
- Voice VLAN 84
- VLAN Filter 85
- Disable PC Port 85
- Data VLAN 86
- PC-Port Untag all 86
- Ignore GARP 87
- Provisioning 87
- NAT Traversal 88
- PVQMon IP 88
- Configure the device settings 89
- STUN S2 IP: 96
- (Single Call Arrangement) 97
- Privacy access codes 98
- Location information 99
- Dialing plan configuration 100
- Characteristics of E911 calls 100
- IP Phone 1140E restrictions 101
- NN43113-300 02.05 Standard 102
- 27 May 2008 102
- NAT firewall traversal 103
- 104 NAT firewall traversal 104
- Three-port switch and VLAN 105
- Phone 1140E 109
- SIP responses 110
- Default error handling 115
- SIP header fields 115
- SDP and Call Hold 119
- Transport layer protocols 119
- SIP security authentication 119
- SIP DTMF Digit transport 120
- Supported subscriptions 120
- Supported instant messaging 120
- Nortel unencrypted Yes 121
- Nortel encrypted Yes 121
- Procedure 14 123
- Reloading UNIStim Firmware 123
- IP Phone 1140E diagnostics 124
- Symbols/Numerics 127
- 128 Index 128
- Index 129 129
- 130 Index 130
Related products and manuals for IP phones Avaya 1140E
IP phones Avaya 1110 User's Guide
(30 pages)
(30 pages)
IP phones Avaya BCM Call Center User Manual
(138 pages)
(138 pages)
IP phones Avaya 0604D9F User Manual
(8 pages)
(8 pages)
IP phones Avaya R4.3 User Manual
(376 pages)
(376 pages)
IP phones Avaya LAN CTE Configuration Guide
(30 pages)
(30 pages)
IP phones Avaya VPNremote Phone User Manual
(25 pages)
(25 pages)
IP phones Avaya 1165E User's Guide
(376 pages)
(376 pages)
IP phones Avaya IP Phone 2001 User's Guide
(14 pages)
(14 pages)
© 2020, manymanuals.com. All rights reserved. | 0.286 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals