Avaya Business Communication Manager 5.0 - Configuration - Devices User Manual download pdf (Page 139)

Set access to calling feature programming 139

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

If your call is urgent, use this code to override a busy signal, or Do Not Disturb.

This feature must be enabled in programming on the initiating set. This feature

is set to off by default.

Procedure steps

Step Action

1 Click Configuration > Telephony > Sets > Active Sets > Capabilities and

Preferences.

2 Select a DN.

3 Select the Capabilities tab in the bottom pane.

4 Select the Priority call check box.

To use this feature, the user can enter FEATURE 69, while the DN is ringing,

or the priority softkey, on a two-line display set. You are connected directly to

the other person, unless they are on another call. That person has the option

of pressing FEATURE 85 (Do Not Disturb) to block the call. On two-line display

telephones, the user also has the option of pressing the BLOCK SoftKey.

--End--

Activating and cancelling ring again

Use this code to have the system to notify you when a telephone you want to

call is no longer busy, or becomes available.

There is no system programming to allow/disallow this feature.

Activate feature: While on the call, enter FEATURE 2.

Cancel feature: Enter FEATURE #2.

Configuring voice paging

If you are unable to reach a person by telephone, or you want to deliver the

same message to more than one person, use the page feature.This feature

allows you to make page announcements in various ways, depending on the

audience you are trying to reach.

Feature constraints:

• Telephones that do not have external speakers can initiate pages, but

cannot receive pages (7000 and 7100 digital telephones and the 2001 IP

telephone).

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 257 258

No comments

Avaya Business Communication Manager 5.0 - Configuration - Devices User Manual Page 139