192 Line and set parameter renumbering
Nortel Business Communication Manager 5.0
Configuration — Devices
NN40170-500 02.04 Standard
August 2009
Copyright © 2009 Nortel Networks
Navigation
• Renumbering set parameters (page 192)
• Renumbering line parameters (page 193)
Renumbering set parameters
Use this procedure to quickly renumber sets and other DN attributes.
Prerequisites
• Launch Element Manager.
• Connect to the Business Communications Manager.
• Navigate to Configuration>Telephony>Sets>All DNs.
Procedure steps
Step Action
1 In the All DNs panel, click Renumber.
The Set Renumber dialog box appears.
2 From the Attribute list, select the DN or other attribute you want to
renumber.
3 In the Begin DN number field, type the number of the starting row of DNs
that you want to renumber.
4 In the End DN number field, type the number of the last row of DNs that you
want to renumber.
5 In the New begin value field, type the new number at which you want the
identified set of DNs to start.
6 Click OK to confirm the new numbering or click Cancel to cancel the new
numbering.
--End--
Variable Definitions
Variable Value
Attribute Select the type of DN you want to renumber (DN, Public OLI,
Private OLI).
Begin DN number Type the number of the DN at the beginning of the range of DNs
you want to renumber.
Comments to this Manuals