Avaya Business Communication Manager 5.0 - Configuration - Devices User Manual download pdf (Page 148)

148 BCM 5.0 devices special features configuration

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

4 From the Hotline type list, select internal or external.

5 Configure the Hotline parameters.

--End--

Variable definitions

Assigning a pause for external dialing

Assign a 1.5-second pause before the device dials out.

Variable Value

Hotline Type This feature allows you to define a telephone number that

automatically dials when you lift the handset or press the

Handsfree button, on a telephone.

• Internal — Define the internal telephone you want to access.

• External — Enter the line you want the call to use. (This

cannot be a target line.)

• Enter the complete call number for the external telephone

you want to access.

If the direct dial telephone is on a remote node of the network,

ensure that the correct line pools are assigned to the telephone

to properly route the call.

Internal number Define the internal telephone you want to access.

• DN:* — The DN of the telephone that is automatically dialed

when the user lifts the handset.

• Direct dial set — Automatically dials a telephone on the

system defined as a direct dial telephone (direct dial access

code).

Facility Select a facility from the list.

• Pool:A — Refer to the line pool assignment for this

telephone.

• Use prime line — Refer to the General record for this

telephone.

• Use routing table — Refer to the routing tables. The routing

code for that table must be part of the External number.

External number Enter the complete call number for the external telephone you

want to access.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 257 258

No comments

Avaya Business Communication Manager 5.0 - Configuration - Devices User Manual Page 148