Set access to calling feature programming 143
Nortel Business Communication Manager 5.0
Configuration — Devices
NN40170-500 02.04 Standard
August 2009
Copyright © 2009 Nortel Networks
2 Select the DN for the telephone where you want to define allowing saved
number redial feature.
3 Select Allow Saved Number check box.
To access the feature, the user must press FEATURE 67.
--End--
Allowing auto-dial
You can program memory buttons for one-touch dialing of internal or external
telephone numbers. When you program an external autodial, you must specify
a path out of the system. You can also program autodial buttons with speed
dial codes.
The Button Programming and tab panels allow you to program the buttons on
a telephone with internal and external autodialers, and with programmed
feature keys.
Procedure steps
Step Action
1 Click Configuration > Telephony > Sets > All DNs > Capabilities and
Preferences tab.
2 Select the DN for the telephone that you want to modify.
3 Select the Button programming tab.
4 Choose the setting you want to modify.
The Modify dialog box appears.
5 Select the Function you want to program.
Note: Depending upon which Function is selected, you may also be
required to select a Value and Digits.
6 Click Ok.
--End--
Programming speed dials in the DN record
BCM 5.0 provides two types of speed dialing:
System Speed Dial programming allows you to assign two or three-digit speed
dial codes to the external numbers called most often. You can set the system
to have 01 to 70 codes or 001 to 255 codes.
Comments to this Manuals