Avaya 1140E User Manual Page 37
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Create the device configuration file on the provisioning server 37
external sources, such as a power failure. A user can be logged out due
to the proxy server going down or during a firmware upgrade.
— YES - turns on the auto login feature.
— NO - turns off the auto login feature.
•
AUTO_UPDATE [YES | NO] is a command to enable or disable
the automatic updating of the IP Phone 1140E with SIP Firmware
configuration files from the provisioning server. Enabling this command
causes the IP Phone 1140E with SIP Firmware to check for updates
once every day. The default is disabled.
— YES - turns on the AUTO_UPDATE feature.
— NO - turns off the AUTO_UPDATE feature.
•
AUTO_UPDATE_TIME [x] is the actual time in seconds, starting from
midnight, before an automatic update occurs. Each IP Phone 1140E
adds random numbers to the time specified by this command so every
IP Phone 1140E does not try to access the provisioning server at the
same time. By default the automatic update feature is disabled (see
AUTO_UPDATE_RANGE).
— x - the time after midnight that the automatic update occurs.
•
AUTO_UPDATE_TIME_RANGE [x] is the range in hours, from the
AUTO_UPDATE_TIME whereby an IP Phone 1140E checks for updates
from the server. The default range is 1 hour.
— x-the range in hours when the IP Phone checks for updates from
the server. The range can be from 1 to 6 hours.
•
TRANSFER_TYPE [MCS | STANDARD] is used to configure the IP
Phone 1140E to activate Nortel conference server-assisted attended
transfers, instead of the industry standard method of attended transfers.
The default setting is MCS.
— MCS - the typical attended transfer used by Nortel proxies. MCS
uses a conference server to do the attended transfer.
— STANDARD - the standard method of a transfer. This method does
not involve a conference server.
•
REDIRECT_TYPE [MCS | RFC3261] is a command used to select
different protocols for set redirection. The default setting is MCS.
— MCS - when the IP Phone 1140E receives either 301 (moved
permanently) or 302 (moved temporarily) during registration, it is
assumed the IP Phone 1140E is moved to a new MCS 5100 system
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
- Phone 1140E Administration 1
- Contents 3
- Index 127 5
- 6 Contents 6
- New in this release 7
- 8 New in this release 8
- How to Get Help 9
- 10 How to Get Help 10
- Introduction to this guide 11
- Related publications 13
- 14 Introduction to this guide 14
- Overview 15
- Related documentation 16
- Installation overview 17
- 18 Overview 18
- Figure 2 18
- Introduction 19 19
- Figure 3 19
- Supported SIP proxy servers 20
- Before installation 21
- Preinstallation 23 23
- 24 Before installation 24
- How provisioning works 25
- Procedure 3 26
- Figure 4 27
- Sample provisioning file 27
- IP Phone 1140E 30
- Device configuration commands 34
- ATTENTION 36
- Feature configuration commands 36
- QoS and ToS commands 44
- Tone configuration commands 45
- NAT configuration commands 47
- VQMon configuration commands 48
- System commands 50
- Dialing function description 52
- Dialing plan 52
- Figure 7 53
- Figure 8 53
- Figure 9 54
- Figure 10 55
- DRegex rules 55
- Downloadable WAV files 56
- Configure the DHCP server 57
- Full DHCP mode 58
- SIP IP Phone class identifier 59
- DHCP VLAN Auto Discovery 61
- 62 Configure the DHCP server 62
- Procedure 4 63
- Installing the IP Phone 1140E 63
- Figure 11 65
- IP Phone 1140E connections 65
- 1140E firmware 67
- Procedure 6 68
- Procedure 7 69
- 3. [FW] Finished 77
- Voice Quality Monitoring 79
- Server set-up 80
- How VQMon works 80
- Introduction 81
- Authorization 83
- Device ID 83
- Password 83
- NO DHCP mode 83
- Net Mask 84
- Voice VLAN 84
- VLAN Filter 85
- Disable PC Port 85
- Data VLAN 86
- PC-Port Untag all 86
- Ignore GARP 87
- Provisioning 87
- NAT Traversal 88
- PVQMon IP 88
- Configure the device settings 89
- STUN S2 IP: 96
- (Single Call Arrangement) 97
- Privacy access codes 98
- Location information 99
- Dialing plan configuration 100
- Characteristics of E911 calls 100
- IP Phone 1140E restrictions 101
- NN43113-300 02.05 Standard 102
- 27 May 2008 102
- NAT firewall traversal 103
- 104 NAT firewall traversal 104
- Three-port switch and VLAN 105
- Phone 1140E 109
- SIP responses 110
- Default error handling 115
- SIP header fields 115
- SDP and Call Hold 119
- Transport layer protocols 119
- SIP security authentication 119
- SIP DTMF Digit transport 120
- Supported subscriptions 120
- Supported instant messaging 120
- Nortel unencrypted Yes 121
- Nortel encrypted Yes 121
- Procedure 14 123
- Reloading UNIStim Firmware 123
- IP Phone 1140E diagnostics 124
- Symbols/Numerics 127
- 128 Index 128
- Index 129 129
- 130 Index 130
Related products and manuals for IP phones Avaya 1140E
IP phones Avaya 1110 User's Guide
(30 pages)
(30 pages)
IP phones Avaya BCM Call Center User Manual
(138 pages)
(138 pages)
IP phones Avaya 0604D9F User Manual
(8 pages)
(8 pages)
IP phones Avaya R4.3 User Manual
(376 pages)
(376 pages)
IP phones Avaya LAN CTE Configuration Guide
(30 pages)
(30 pages)
IP phones Avaya VPNremote Phone User Manual
(25 pages)
(25 pages)
IP phones Avaya 1165E User's Guide
(376 pages)
(376 pages)
IP phones Avaya IP Phone 2001 User's Guide
(14 pages)
(14 pages)
© 2020, manymanuals.com. All rights reserved. | 0.860 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals