Avaya 1140E User Manual Page 72

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 71
72 Upgrade and convert the IP Phone 1140E firmware
If the number is lower than 0625C1H, go to the section "Upgrade UNIStim
Firmware to the minimum required UNIStim Firmware" (page 72) and follow
the instructions to upgrade an IP Phone 1140E to the minimum-required
version of UNIStim Firmware before you convert to SIP Firmware.
Upgrade UNIStim Firmware to the minimum required UNIStim Firmware
Use either of the following two methods to upgrade UNIStim Firmware.
1. UFTP download initiated by the server if the server supports this method
of upgrading UNIStim Firmware. Refer to the appropriate documentation
for your call server for instructions on using this method.
2. TFTP download on bootup.
If necessary, use the following procedure to configure the TFTP server.
Procedure 9
Configuring the TFTP server
Step Action
1
The IP Phone 1140E always executes the TFTP download at bootup
if a TFTP IP address is configured on the IP Phone 1140E after
being initiated by the telephony call server.
2
Go to the TFTP server and create the 1140e.cfg provisioning
file. The 1140e.cfg provisioning file is a clear text file. Create the
provisioning file as shown in the next table.
Table 12
Sample 1140e.cfg provisioning file
[FW]
DOWNLOAD_MODE FORCED
VERSION 0625C23
FILENAME 0625C23.bin
This configuration file forces the firmware download of 0625C23.bin.
3 Download and copy the firmware to the TFTP server directory.
To download the UNIStim Firmware for the IP Phone 1140E from
the Nortel Web site:
1. Go to w
ww.nortel.com/support.
2. Log on to the Nortel Web site with a valid Nortel User ID and
Password.
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Page view 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 131 132

Comments to this Manuals

No comments