Avaya 1140E User Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
74 Upgrade and convert the IP Phone 1140E firmware
Procedure 10
Downloading UNIStim Firmware automatically through TFTP on bootup
Step Action
1
Press the Globe/Services key on the IP Phone 1140E twice quickly.
If the admin password prompt appears, enter the password
26567*738
The Local Tools menu appears:
Table 13
Local Tools menu
1. Preferences
2. Local Diagnostics
3. Device Settings
4. Lock Menu
2
Select 3. Device Settings from the Local Tools menu.
The Device Settings screen appears.
3 If you are using DHCP, select Full or Partial. If you are manually
configuring the IP address, netmask, and gateway address, select
No.
4
If the DHCP option is set to Full or Partial, the IP address is
automatically obtained.
5
Configure the TFTP IP address within the IP Phone 1140E Device
Settings menu.
This can be the provisioning server as defined in the chapter
"Configure the provisioning server" (page 25).
6
Select the Apply&Reset Context-sensitive soft key to save the
settings and reset the IP Phone 1140E.
The IP Phone 1140E downloads the firmware file. The display
shows [FW] reading
If the download is successful, the display shows [FW] writing
and the blue LED flashes.
After the firmware image is downloaded to the IP Phone 1140E, the
display shows [FW] finished... the blue LED stops flashing, and the
IP Phone 1140E resets.
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 131 132

Comments to this Manuals

No comments