94 Device Settings on the IP Phone 1140E with SIP Firmware
•
Protocol: Select either TFTP, FTP, or HTTP used for provisioning
in the Protocol box.
Table 34
Protocol configuration
TFTP
TFTP
FTP
Protocol:
HTTP
•
Device ID: Enter the Device ID used by the provisioning server
for authentication of the IP Phone 1140E.
Note 1: TFTP does not require a Device ID. If FTP or HTTP
are used, enter the information for a Device ID
Note 2: Enter your User ID as the Device ID.
Table 35
Device ID configuration
Device ID : XXXXXXXXX
•
Password: Enter the P assword used by the provisioning server
for authentication of the IP Phone 1140E. Note: TFTP does not
require a Password. FTP and HTTP do require a password.
Table 36
Password configuration
Password : XXXXXXXXX
19
Configure the PVQMon IP address.
If this server is available on the network, enter the PVQMon IP
address.
Table 37
PVQMon IP configuration
PVQMon IP :
0. 0. 0. 0
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
Comments to this Manuals