Chapter 12 CallPilot Manager configuration 111
CallPilot Manager Set Up and Operation Guide
2 Click the Access Passwords link.
The Access Passwords page appears.
3 To set an access password for Call Center administration:
• In the Call Center Administration box type the Call Center administration password.
• In the Confirmation box type the Call Center administration password again.
4 To set an access password for modem access:
• In the Modem Access box type the modem access password.
• In the Confirmation box type the modem access password again.
5 Click the Submit button.
Configuring CallPilot network settings
You can set the names and addresses that appear for CallPilot Manager in browser windows and in
the network environment.
Configure CallPilot network settings through CallPilot Manager only if you use CallPilot Mini or
CallPilot 150. If you use Business Communications Manager you configure CallPilot network
settings through Unified Manager.
To set the unit address and identification properties
1 Click the Configuration heading.
2 Click the Unit Address/Identification link.
The Unit Address/Identification page appears.
3 In the Host name or IP Address box type the Internet address or FQDN (Fully Qualified
Domain Name) of your CallPilot server. If you type in an FQDN name make sure that you also
enter the DNS configuration in steps 6 and 7.
4 If you want to reset the IP address to the factory default, click the Reset to Defaults button.
5 In the Subnet Mask box type the subnet mask address.
6 In the Primary DNS box type the IP address of your network's primary Directory Name
Server.
7 In the Secondary DNS box type the IP address of your network's backup Directory Name
Server. The secondary DNS is optional.
8 In the Default Gateway box type the IP address of your network's gateway server. The default
gateway is optional.
9 Click the Submit button.
Comments to this Manuals