Avaya IP Telephony Configuration Guide download pdf (Page 19)

Using telephone features 19

Telephony Features Handbook

Telephone display and display keys

Telephones with displays, show prompts on one or two lines. Telephones with two-line displays,

have display buttons under the display, which activate the action indicated by the second line of

the display. The first line provides the

The following table shows the dialpad equivalent for the display button functions for one-line

display telephones, such as the 7208.

Buttons with indicators

Line buttons, which have displays next to them, light up with call indicators when the line has a

call. All telephones except the T7316E display the following prompts:

The T7316E telephone displays a set of icons in place of flashing prompts when it is connected to

a system with BCM 3.5 or newer software. If you connect a 7316E telephone to a system that is

running previous versions, the standard line indicators display.

The KIM also displays these icons. Note that the 7316E+KIM is only supported by BCM 3.5 and

newer software.

Display Dialpad Display Dialpad Display Dialpad

OK Hold SHOW # OVERRIDE #

QUIT Release CANCEL # BKSP Volume bar

ADD * VIEW #

Flashing on and off for equal lengths of time There is an incoming call on the line.

Flashing on and off more quickly You have placed a call on hold.

Flashing on for longer than off A person has put a call on hold on that line.

On, but not flashing You are connected on that line or the line is in use.

Off The line is free.

Active call

The line is active and/or you are

connected to this telephone.

Call forward The call on this line has

been forwarded.

Ringing A call is coming into this line.

Active button The feature assigned to

this button is active.

Also used by Do Not

Disturb.

Hold

The call on this line is on Hold

at this telephone.

Two-line display

Display buttons

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

No comments

Avaya IP Telephony Configuration Guide Page 19