Avaya IP Telephony Configuration Guide download pdf (Page 37)

Using telephone features 37

Telephony Features Handbook

Conference calling

You can establish a call between three people. These codes allow you to control how the

conference occurs, and how it is handled.

Conference

Make three-way calls.

Establish a conference call between yourself and two other parties.

1. Make or answer the first call.

2. Put the first call on hold.

3. Make or answer the second call.

4. After the second call is connected, press FEATURE 3

5. Press the line or intercom button of the first held call (not required on the T7100/M7100

telephone).

6. Press RLS to end the conference call.

Programming note: Some system profiles also allow the system administrator to

determine if a tone is heard by all parties when someone joins a conference. This is set

under Feature settings.

Each telephone that wants to use conference must have at least two intercom buttons

assigned.

To remove yourself from a conference permanently:

Press FEATURE 70.

The other two callers remain connected. (Some external lines may not support this

feature. Ask your System Administrator.)

To put a conference on hold:

Press HOLD.

The other two callers can still talk to each other.

To split a conference:

Press the line or intercom button of one caller to consult privately while the other

caller is on hold.

To re-establish the conference:

Press FEATURE 3.

To disconnect one party:

1. Press the line or intercom button of the caller you want to disconnect, then press

RLS.

2. Press the line or intercom button of the remaining caller to resume your

conversation.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

No comments

Avaya IP Telephony Configuration Guide Page 37