Avaya IP Telephony Configuration Guide download pdf (Page 38)

38 Using telephone features

P0609328 01

To independently hold two calls:

Press the line or intercom button of the first caller, then press HOLD. The second

caller is automatically put on hold.

To re-establish the conference:

Press HOLD to retrieve one call from hold, press FEATURE 3, then retrieve the

second call from hold.

Create a conference call by releasing privacy

With a line programmed with privacy, you can turn privacy off to allow another person

with the same line to join in your conversation and form a conference. All the rules for

a conference apply but there is one line in use, instead of the normal two. This means

that you cannot split a conference set up using Privacy.

1. Press FEATURE 83.

2. Tell the other person to press the line button and join your conversation.

Only two Business Communications Manager telephones and the external caller can

take part in this kind of conference.

To send Hookswitch or DTMF during a conference call

Either Business Communications Manager telephone engaged in a three-way

conference call over a Network CLID or DS trunk can issue a hookswitch or DTMF

dialing request without leaving the conference. This feature must be allowed in

programming under Feature settings by the system administrator.

Note: This feature is not available for i20xx telephones or Symbol NetVision

handsets, since they cannot receive long or short tones.

• If you want the other set to hear DTMF tones during dial, ensure that the Long

Tones feature is active (FEATURE 808).

• If you want to conference in someone through the trunk, use the button marked

Link (FEATURE 71)

Refer to “Link” on page 22 and “Long Tones” on page 22 for information about these

two features.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 83 84

No comments

Avaya IP Telephony Configuration Guide Page 38