Avaya IP Telephony Configuration Guide download pdf (Page 65)

Common display prompts 65

Telephony Features Handbook

No avail SWCA SWCA: The FEATURE *520 request was unsuccessful, either because the

telephone has no associated SWCA keys, or all the SWCA keys for that

telephone are associated with other calls.

Note: If the call is an internal call and the destination set has a SWCA

associated with the call, and if the originating set requests that the call gets

associated with a different SWCA, then the destination telephone transfers

the call to the new SWCA position. If the destination telephone does not

have a button programmed for the new SWCA position, the call disappears

from all SWCA button appearances and can only be retrieved by entering

the corresponding SWCA code.

No button free You tried to make, receive or pick up a call when no line button was

available. Some features require you to have a button free. Releasing calls

can free up line buttons.

Message: You have no line button free with which to reply to a message.

No call to park Call park: You have tried to use Call Park with no active call on your

telephone. If the call you want to park is on hold, reconnect to the call before

you park it.

No call on: 101 Call park: There was no call on the retrieval code (101-125) that you

entered.

No calls waiting You tried to use Call Queuing but no call was ringing at your telephone.

SWCA: The FEATURE *537 or FEATURE *538 request was used, but

there are no calls parked on any of the assigned buttons on your telephone.

No free lines All the lines or line pools available to the telephone are in use. This prompt

also appears when you try to dial an external number or use a feature that

conflicts with the lines, line pools or prime line used by the telephone. Your

installer must correct this situation.

No last number You have not dialed an external telephone number since the last power

interruption or system reset.

No line to use Line redirection: You have one external line on your telephone, but you need

a second line to perform line redirection. Redirect your external line using a

line pool as the outgoing line.

No line selected Auto dial or Speed dial: The telephone is set up to dial an external number

on a prime line but the telephone does not have a prime line. Your installer

must correct this situation.

No line selected There is no call ringing at your telephone. If you have a flashing line button

but your telephone is not ringing, press the line button to answer the call on

that line.

Common display prompts: (Continued)

Display prompt Description of error or action

Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 83 84

No comments

Avaya IP Telephony Configuration Guide Page 65