Avaya IP Telephony Configuration Guide Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
66 Common display prompts
P0609328 01
No number saved Saved number redial: You have tried to save the number of an incoming call.
You can only save numbers that you have dialed.
No number stored Speed dial: There is no number stored on the speed dial code you have
dialed.
Message: There has been no number programmed for the message center.
Contact your voice messaging service provider.
No voice call Voice call: The telephone receiving the call cannot accept voice calls for one
of the following reasons:
the telephone is active or ringing with another call
Call Forward is on
Do Not Disturb is on
Voice Call Deny is on
it is not a Business Communications Manager telephone
Your call continues as a normal ringing call.
Not available You tried to use a feature that is currently not available from your system.
Transfer: The telephone where you directed a call is not in service or is or
unavailable. The call returns to your telephone.
Not HG member
Observe
Silent monitor: The DN you entered is not a Hunt Group member. Press
Observe to enter another hunt group telephone.
Not in service Call forward: Two or more telephones are linked in a forwarding chain, and
one is out of service or used for programming.
Not in service
CANCL RETRY
Transfer: The telephone to which you are trying to transfer a call is out of
service.
Not in service
CALLBCK
Camp-on: The telephone to which you have camped a call is out of service
or is used for programming. The call has come back to you. Press
CALLBCK
or the line button to reconnect to the call. On T7100/M7100 telephones, just
pick up the handset to reconnect with the call.
Not in Service
Observe
Silent monitor: The DN you entered did not respond to the system. Press
Observe to enter another hunt group telephone.
Common display prompts: (Continued)
Display prompt Description of error or action
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 83 84

Comments to this Manuals

No comments