
Event Messages (BGP through EGP)
303550-A Rev 00
3-71
Entity Code/Event Code 96/72
Decimal Identifier 16815688
Severity: Warning
Message: Error while down loading DCM image into DCM<dcm_board_number> shared memory.
DCM will boot in local mode.
Meaning: When you started DCCMW, the specified DCM board attempted to copy a boot image
from the router flash memory to the DCM board’s shared memory (DRAM), but could not
find the file for one of the following reasons:
• You specified an incorrect filename for the boot image
• You specified an incorrect volume
• You specified an image file that does not exist
The DCM board will boot from the default image in the DCM local flash memory.
Action: Check that you specified the correct image filename and volume, that you are
downloading to the correct DCM board, and that the image file exists. Correct any
problems and enable DCMMW again.
Entity Code/Event Code 96/73
Decimal Identifier 16815689
Severity: Warning
Message: Error - Cannot Enable a wfDCMEntry without first Enabling wfDCMmw.
Meaning: DCMMW is currently disabled, causing an enable request for a DCM board to fail.
Action: Enable DCMMW (wfDCMmw) and re-issue the base record (wfDCMEntry) enable
command.
Entity Code/Event Code 96/89
Decimal Identifier 16801881
Severity: Warning
Message: DCMMW_DCM_BAD_VERSION
Meaning: An older version of the Ethernet DCM image is running on the router.
Action: Upgrade the Ethernet DCM image to Version 2.00.1 to run RMON or RMON2 on the
router.
Comments to this Manuals