Avaya Event Messages for Routers User Manual download pdf (Page 847)

100

101

Event Messages (SYNC through XNS)

303550-A Rev 00

9-13

Entity Code/Event Code 20/73

Decimal Identifier 16782409

Severity: Warning

Message: Cannot configure ISDN and SYNC COM <connector_no.> together.

Meaning: This message is AN specific. Due to a hardware limitation in the AN, configuring SYNC

COM1 and any ISDN B channel together produces an invalid configuration record. The

ISDN B channel driver does not proceed until the disruptive SYNC configuration is

deleted.

Action: Either delete the disruptive SYNC port from this config or delete the entire ISDN interface

from this configuration. This warning should not appear if the configuration is created

using Site Manager.

Entity Code/Event Code 20/77

Decimal Identifier 16782413

Severity: Warning

Message: Invalid connector COM <connector_no.> specified for SYNC port.

Meaning: An invalid configuration record exists for this SYNC port. Specifically, the connector

number specified for this SYNC port is invalid. The SYNC driver goes dormant.

Action: Reconfigure the SYNC port. This warning should not appear if the configuration is created

using Site Manager.

Entity Code/Event Code 20/81

Decimal Identifier 16782417

Severity: Warning

Message: Connector COM<connector_no.>: Remote end reports not receiving frames.

Meaning: The remote end has reported through BOFL that it is not receiving frames. This could be

due to a disconnect in the transmission cable from this router platform to the remote

device (while the transmission cable from the remote device to this router platform is still

intact).

Action: Check all connections between this router platform and the remote device.

1 2 ... 842 843 844 845 846 847 848 849 850 851 852 ... 927 928

Comments to this Manuals

No comments

Avaya Event Messages for Routers User Manual Page 847

Comments to this Manuals

Related products and manuals for Networking Avaya Event Messages for Routers