Avaya Event Messages for Routers User Manual download pdf (Page 295)

100

101

Event Messages (BGP through EGP)

303550-A Rev 00

3-107

Entity Code/Event Code 63/17

Decimal Identifier 16793361

Severity: Warning

Message: Connector COM <connector_no.> Remote alarm indication failure.

Meaning: The remote end of the specified MCT1 port has detected an unframed, all-ones bit pattern

in the received data stream and issued an Alarm Indication Signal (AIS), or Yellow Alarm.

The remote end clears the AIS condition after receiving a properly framed bit stream.

Entity Code/Event Code 63/18

Decimal Identifier 16793362

Severity: Warning

Message: Connector COM <connector_no.> failure cleared.

Meaning: MCT1 has cleared a previously generated alarm.

Entity Code/Event Code 63/23

Decimal Identifier 16793367

Severity: Warning (BayStream software only)

Message: Primary and secondary clocks unoperational - Switching to Internal Clock Source.

Meaning: The primary and secondary sources of timing signals (specified by the Primary Clock

Source and Secondary Clock Source global parameters) have been withdrawn or have

failed. MCT1 will attempt to generate timing signals internally.

Action: Check cabling of the primary and secondary clock sources.

Entity Code/Event Code 63/34

Decimal Identifier 16793378

Severity: Warning (BayStream software only)

Message: Connector COM <connector_no.> Loop timing source OK.

Meaning: MCT1 is receiving valid loop timing signals from Port 0 or Port 1.

Action: None required.

1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 927 928

Comments to this Manuals

No comments

Avaya Event Messages for Routers User Manual Page 295

Comments to this Manuals

Related products and manuals for Networking Avaya Event Messages for Routers