Avaya IP500 V2 Operations Instructions download pdf (Page 105)

Installing IP500/IP500 V2 Page 105

15-601042 Issue 28g (11 October 2013)IP Office 9.0

Initial Configuration Using IP Office Manager: Setting the System Locale

5.3 Changing the IP Address Settings

When a new or defaulted IP Office is switched on, the control unit will make a DHCP requests for IP address settings on

each of its LAN interfaces. That is on its LAN port (LAN1) and on its WAN port (LAN2).

· If the IP Office receives a response from a DHCP server, it will configure itself as a DHCP client using the address

details provided by the DHCP server.

· If the IP Office does not receive a response from a DHCP server, it will still configure itself as a DHCP server but

using the following default address details:

Network Settings

LAN Port (LAN1)

WAN Port

(LAN2)

IP address

192.168.42.1.

192.168.43.1

IP Mask

255.255.255.0

DHCP Mode

Client

No of DHCP IP Addresses

200.

If the IP address and DHCP mode settings are not suitable for the customers network they should changed. Note that

changing the IP Office's IP address settings requires it to restart.

· ! WARNING

This process requires the IP Office system to reboot in order to complete the changes. The reboot ends any

current calls and services.

To change the IP address settings:

1.Start IP Office Manager and receive the configuration from the IP Office system.

2.Click on System.

3.On the System tab, in the Name field enter a distinctive name for the IP Office system. Click OK.

4.Click on the LAN1 tab.

5.On the LAN Settings sub-tab, change the IP Address, IP Mask and DHCP Mode settings to match the customer

requirements. These settings are used for the LAN port on the back of the IP Office control unit. Click OK.

6.Repeat the process for the LAN2 tab. Those settings are used for the WAN port on the back of the IP Office

control unit.

7.Click on the save icon and save the updated configuration back to the IP Office system.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 441 442

No comments

Avaya IP500 V2 Operations Instructions Page 105