Avaya IP500 V2 Operations Instructions download pdf (Page 273)

Installing IP500/IP500 V2 Page 273

15-601042 Issue 28g (11 October 2013)IP Office 9.0

System Components: IP400 Expansion Modules

10.9.4 Phone V2

The IP400 Phone V2 module (also known as the Phone V2 module) is used to add additional PHONE ports to an IP Office

system. PHONE ports are used for analog phones.

The Phone V2 module is available in 8, 16 and 30 port variants, referred to as the Phone 8, Phone 16 and Phone 30

respectively.

The Phone V2 module supersedes the original IP400 Phone module, now referred to as the Phone V1. The module version

is indicated by labels on both the base and the rear of the module. Key changes are:

· The Phone V2 uses an earthed 3-pin 60W external power supply unit.

· With IP Office 3.1, the message waiting indication (MWI) on each port can be configured for None, On, 51V Stepped,

81V, Line Reversal A or Line Reversal B. On uses the default determined by the system locale. Ports on a Phone V2

module can additionally be configured for 101V operation.

· These ports do not include a ringing capacitor. Therefore for connection to 4-wire analog phones, where this is a

requirement (typically the United Kingdom and New Zealand), connection should be via a Master socket containing

ringing capacitors.

· The DTE serial port on the rear of the module has been changed to a 9-pin D-type socket.

Feature

Details

Supported on

All IP Office control units except Small Office Edition.

Locales

Supported in all IP Office locales.

Software Level

IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an

integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13

power cord for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office

modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack

Mounting Kit.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.

Weight

Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)

Module Front

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 441 442

No comments

Avaya IP500 V2 Operations Instructions Page 273