Avaya IP500 V2 Operations Instructions download pdf (Page 69)

Installing IP500/IP500 V2 Page 69

15-601042 Issue 28g (11 October 2013)IP Office 9.0

Administration Software: Installing the Admin Applications

3.3 Installer PC Connection

During installation it is recommended that the IP Office control unit is started

without it being connected to any network. That ensure that the IP Office

defaults to a known set of IP address settings.

If the IP Office is started connected to a network with a DHCP server. The

programming PC will need to be connected to the same network as either a

DHCP client or with an IP address valid for that network.

This section covers connecting your installation PC directly to the IP Office

control unit.

Requirements

· o IP Office Administration PC

A Windows PC with the IP Office Administrator Application suite installed

· o LAN Cable

To connect directly to a defaulted IP Office system:

1.The default address for an IP Office control unit LAN port is 192.168.42.1/255.255.255.0. To directly connect a PC,

change the TCP/IP properties for the PCs LAN port to the following:

Fixed IP address

192.168.42.203

Subnet mask

255.255.255.0

Default gateway

192.168.42.1.

· While setting the PC to be a DHCP client could be used, this is not recommended for performing more

advanced functions such as firmware upgrades.

2.Connect the LAN cable from the PCs LAN port the LAN or LAN1 port on the IP Office control unit.

3.Check that the orange LED lamp on the IP Office LAN port is on. The green LED may also be flickering as it

indicates traffic across the LAN connection.

4.To test the connection before running IP Office Manager or System Status Application:

· Select Start | Run and enter cmd.

· In the command window that appears enter ping 192.168.42.1. The results should show a number of ping

replies from the IP Office. This confirms basic communication between the IP Office Manager PC and the IP

Office.

· If there are no ping replies enter ipconfig. The results should list the IP address settings of the IP Office

Manager PC as required above. If they do enter exit and check the cable connection.

5.You can now start IP Office Manager , System Status or System Monitor .

70 71 72

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 441 442

No comments

Avaya IP500 V2 Operations Instructions Page 69