Avaya IP500 V2 Operations Instructions download pdf (Page 126)

Installing IP500/IP500 V2 Page 126

15-601042 Issue 28g (11 October 2013)IP Office 9.0

7.2 Creating an IP Office SD Card

The processes below can be applied to Avaya IP Office SD cards. They can also be applied to non-Avaya SD cards for use

in a system's Optional SD card slot.

The card must be the following format. For the System SD slot, only Avaya SD cards with a Feature Key should be used.

· SDHC 4GB minimum Class 2+. Single partition FAT32 format.

· WARNING

Avaya supplied SD cards should not be formatted using any other method than the format commands within IP

Office Manager and System Status Application. Formatting the cards using any other method removes the feature

key used for IP Office licensing from the card.

Creating a Card on a Local PC

These processes can be run on an SD card inserted in a card reader on the IP Office Manager PC. That card can then be

used in the System SD card slot of a new system or in the Optional SD card slot of an existing system to upgrade that

system.

Formatting an SD Card

Avaya SD cards should only be formatted using the format options provided within IP Office applications. This process is

not normally necessary with Avaya SD cards unless you suspect that the card has been incorrectly formatted elsewhere.

· WARNING: All File Will Be Erased

Note that this action will erase any existing files and folders on the card. Once a card has been formatted, the

folders and files required for IP Office operation can be loaded onto the card from the IP Office Manager PC using

the Recreate IP Office SD Card command.

1.Insert the SD card into a reader slot on the IP Office Manager computer.

2.Using IP Office Manager, select File | Advanced | Format IP Office SD Card.

3.Select IP Office A-Law, IP Office U-Law, IP Office Partner Edition or IP Office Norstar Edition. This

selection just sets the card label shown when viewing the card details. It does not affect the actual formatting.

Select the label that matches the files set you will be placing on the card.

4.Browse to the card location and click OK.

5.The status bar at the bottom of IP Office Manager will display the progress of the formatting process.

6.When the formatting is complete, you can use the Recreate IP Office SD Card command to load the IP Office

folders and files onto the card from the IP Office Manager PC.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 441 442

No comments

Avaya IP500 V2 Operations Instructions Page 126