Avaya IP500 V2 Operations Instructions download pdf (Page 202)

Installing IP500/IP500 V2 Page 202

15-601042 Issue 28g (11 October 2013)IP Office 9.0

9.11 Adding External Expansion Modules

External expansion modules connect to the IP Office control unit using an

expansion interconnect cable.

Objective - Connect the external expansion modules and then restart the

control unit so that the new modules are recognized.

Each module is supplied with an expansion connect cable and a power supply unit

An appropriate locale specific power cord for the power supply unit, and cables

for the ports on the front of the module must be ordered separately.

· Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This

cable must be used when connecting to expansion ports on the rear of a control unit.

· When connecting to expansion ports on an IP500 4-Port Expansion card, a yellow 2 meter (6'6") expansion

interconnect cable can be used in place of the standard blue cable. 4 Yellow cables are supplied with the IP500

4-Port Expansion card.

Installation Requirements

· o Installation space either on or under the existing IP Office control unit.

· o Switched power outlet socket.

· o Available EXPANSION port on the control unit.

· o Grounding Requirements

· o Functional Grounding

Connection of a functional earth is:

· o Recommend for all modules.

· o Connection of a functional ground is mandatory for Analog Trunk module.

· o Protective Grounding

Connections of a protective ground via surge protection equipment is:

· o Mandatory for Analog trunk modules in the Republic of South Africa.

· o Mandatory for Digital Station and Phone modules connected to out of building extensions.

· o Mandatory for Digital Station V2 and Phone V2 modules.

Tools Required

· o IP Office Manager PC.

· o Tools for rack mounting (optional).

204

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 441 442

No comments

Avaya IP500 V2 Operations Instructions Page 202