Avaya IP500 V2 Operations Instructions download pdf (Page 221)

Installing IP500/IP500 V2 Page 221

15-601042 Issue 28g (11 October 2013)IP Office 9.0

System Components: IP500 Base Cards

10.3.2 Analog Phone

This card is used to add analog phone ports to an IP500 and IP500 V2 control unit. It is available in two variants,

providing either 2 or 8 analog extension ports.

· Supports

Provides either 8 or 2 analog phone ports depending on card

variant.

· IP500 Control Unit:

· IP500 V2 Control Unit:

· Maximum per Control Unit: 4.

· IP500 Trunk Card Support: 1.

Port Type

Ports

Features

Analog

Extension

1 to 8

· Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK and UK20.

· REN 2 (1 for external bell device).

· Off-Hook current: 25mA

· Ring Voltage: 40V.

· Intended for connection to two-wire analog phones, the ports do not include a ringing

capacitor. For connection to 4-wire analog phones, connection should be via a master

socket with ringing capacitors.

· If fitted with an analog trunk card, for the Phone 8, during power failure extension port

8 is connected to the analog trunk port 12.

Port LEDs

· No status LEDs are used for analog phone extensions.

· LED1 is also used for base card status:

· Red On = Error

· Red Slow Flash = Initializing.

· Red Flash every 5 seconds = Card

okay.

· Red Fast Flash = System shutdown.

Optional Trunk

Card Ports

9 to 12

The card can be fitted with one trunk daughter card of any type. The trunk daughter card

then uses ports 9 to 12 on the base card for its trunk connections.

Port LEDs

LED use depends on the type of daughter card installed on the base card:

· LED 9 is also used for daughter card status.

· Red On = Error

· Red Slow Flash = Initializing.

· Red Flash every 5 seconds = Card

okay.

· Red Fast Flash = System shutdown.

Analog Card

· Green on = V1: Card installed. V2: Line connected to the port

but idle.

· Green flashing = Line in use.

PRI Card

· Off = No trunk present.

· Green on = Trunk present.

· Green flashing = Trunk in use.

· Red/Green Fast Flash (port 9) or Green Fast Flash (port

10) = Alarm indication signal (AIS) from the trunk remote

end.

· Red with Green Blink (port 9) or Green Blink (port 10) =

Port in loopback mode (set through IP Office System Monitor).

BRI Card

· Off = No trunk present.

· Green on = Trunk present.

· Green flashing = Trunk in use.

Name

Description

SAP Code

IPO 500 Extn Card Phone 2

IP Office 500 Extension Card Phone 2

700431778

IPO 500 Extn Card Phone 8

IP Office 500 Extension Card Phone 8

700417231

391

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 441 442

Comments to this Manuals

No comments

Avaya IP500 V2 Operations Instructions Page 221

Comments to this Manuals

Related products and manuals for Gateways/controllers Avaya IP500 V2