Installing IP500/IP500 V2 Page 234
15-601042 Issue 28g (11 October 2013)IP Office 9.0
Not present.
LEDs
· LEDs 1 to 8 are unlabelled. They are used to indicate voice compression channel usage.
Each LED lit represents 12.5% of the available voice compression channel capacity in
use (total card capacity rather than licensed capacity).
· LED1 is also used for base card status:
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card
okay.
· Red Fast Flash = System shutdown.
The card can be fitted with one trunk daughter card of any type. The trunk daughter card
then uses ports 9 to 12 on the base card for its trunk connections.
LEDs
LED use depends on the type of daughter card installed on the base card:
· LED 9 is also used for daughter card status.
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card
okay.
· Red Fast Flash = System shutdown.
· Green on = V1: Card installed. V2: Line connected to the port
but idle.
· Green flashing = Line in use.
· Off = No trunk present.
· Green on = Trunk present.
· Green flashing = Trunk in use.
· Red/Green Fast Flash (port 9) or Green Fast Flash (port
10) = Alarm indication signal (AIS) from the trunk remote
end.
· Red with Green Blink (port 9) or Green Blink (port 10) =
Port in loopback mode (set through IP Office System Monitor).
· Off = No trunk present.
· Green on = Trunk present.
· Green flashing = Trunk in use.
IP500 Voice
Compression
Modules
IP Office 500 Media Card Voice Coding Module 32
" Trade Agreements Act compliant variant.
IP Office 500 Media Card Voice Coding Module 64
IP500 Voice
Compression
Modules V2
IP500 Media Card Voice Coding Module 32 V2
" Trade Agreements Act compliant variant.
IP500 Media Card Voice Coding Module 64 V2
422
422
Comments to this Manuals