Installing IP500/IP500 V2 Page 271
15-601042 Issue 28g (11 October 2013)IP Office 9.0
System Components: IP400 Expansion Modules
10.9.3 Digital Station
The IP400 Digital Station module (also known as DS module) is used to add additional DS ports to an IP Office system.
The DS module is available in 16 and 30 port variants, referred to as DS16 and DS30 modules respectively. The IP400
Digital Station Module has been superseded by the IP400 Digital Station Module V2 .
All IP Office control units except Small Office Edition.
Supported in all IP Office locales .
IP Office core software level 1.0 minimum. Bin file = nadcp-16.bin.
Power supply unit (see below) and Expansion Interconnect cable.
The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C7 power
cord for the external PSU is required but is not supplied with the module.
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30).
Module Front
269
51
39
Comments to this Manuals