Avaya IP500 V2 Operations Instructions Page 232

  • Download
  • Add to my manuals
  • Print
  • Page
    / 442
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 231
Installing IP500/IP500 V2 Page 232
15-601042 Issue 28g (11 October 2013)IP Office 9.0
10.3.9 TCM8 Digital Station
This card is used to add TCM RJ45 extension ports to an IP500 V2 control unit. It provides 8 RJ45 extension ports for
supported M-Series and T-Series digital stations. It can also be used for 4100 and 7400 Series phone support by
connection to a Digital Mobility Solution system.
A further 4 RJ45 ports are provided for trunk connections when an IP500 trunk card is fitted to this card.
· Supports
Provides 8 TCM ports for supported 4100, 7400, M and T-Series
digital stations.
· IP500 Control Unit:
· IP500 V2 Control Unit:
· Maximum per Control Unit: 4.
· IP500 Trunk Card Support: 1.
Port Type
Ports
Features
TCM
1 to 8
Cable lengths up to 305 m (1000 ft) using 0.5mm (24AWG) wires do not require a power
booster. For TCM phones, lengths up to 790 m (2600 ft) are supported if an auxiliary
power supply booster is used.
LEDs
· Green On = Phone detected.
· LED1 is also used for base card status:
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card
okay.
· Red Fast Flash = System shutdown.
Optional Trunk
Card Ports
9 to 12
The card can be fitted with one trunk daughter card of any type. The trunk daughter card
then uses ports 9 to 12 on the base card for its trunk connections.
LEDs
LED use depends on the type of daughter card installed on the base card:
· LED 9 is also used for daughter card status.
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card
okay.
· Red Fast Flash = System shutdown.
Analog Card
· Green on = V1: Card installed. V2: Line connected to the port
but idle.
· Green flashing = Line in use.
PRI Card
· Off = No trunk present.
· Green on = Trunk present.
· Green flashing = Trunk in use.
· Red/Green Fast Flash (port 9) or Green Fast Flash (port
10) = Alarm indication signal (AIS) from the trunk remote
end.
· Red with Green Blink (port 9) or Green Blink (port 10) =
Port in loopback mode (set through IP Office System Monitor).
BRI Card
· Off = No trunk present.
· Green on = Trunk present.
· Green flashing = Trunk in use.
Name
Description
SAP Code
IPO 500 TCM 8 Extn Card Assy
IP Office 500 TCM 8
700500758
368
Page view 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 441 442

Comments to this Manuals

No comments