Installing IP500/IP500 V2 Page 269
15-601042 Issue 28g (11 October 2013)IP Office 9.0
System Components: IP400 Expansion Modules
10.9.2 Digital Station V2
The IP400 Digital Station V2 (also known as DS V2) is used to add additional DS ports to an IP Office system. The DS V2
is available in 16 and 30 port variants, referred to as DS16 V2 and DS30 V2 respectively.
The DS V2 supersedes the original IP400 Digital Station, now referred to as a DS V1. The module version is indicated by
labels both the base and the rear of the module.
All IP Office control units except Small Office Edition.
Supported in all IP Office locales .
IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.
Power supply unit (see below) and Expansion Interconnect cable.
The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13
power cord for the external PSU is required but is not supplied with the module.
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30 V2)
Module Front
51
39
Comments to this Manuals